3. Picking up sound via the built
in microphones in the receiver.
Set the audio level by means of
the right hand volume controller
(see page 12) (Note! Start listen-
ing at a low volume. If the volume
is not set on the lowest position,
the sound could potentially cause
harm to the customers' hearing.)
Select the directional or omni-
directional microphone with the
arrow buttons in the middle (see
page 12). Place the receiver on a
table or aim it at the person you
want to listen to.
Choose directional or omni-
directional settings depending on
the situation. Normally in noisy
surroundings directional setting is
preferred.
10
4. Picking up sound by means of
transmitter.
When the distance between you
and the speaker /sound source is
longer, let the person you want to
hear use the transmitter.
Set the audio level by means of the
left hand volume controller. (see
page 12) (Note! Start listening at a
low volume)
(When the transmitter or receiver is turned on, the most recent
settings for volume and microphone type are automatically
selected)
11