Comfort audio Comfort Contego T900 Mode D'emploi page 10

Display Symbols on the Receiver, Comfort Contego R900
CH:2
9
CH:2
Channel
The number shows which channel the receiver is set on.
(The receiver and transmitter must be on the same chan-
nel in order to be able to work together.) When the excla-
mation mark "!" is displayed it means that you are trans-
mitting on a frequency that you must apply for permission
to use. (Comfort Audio is not liable for unauthorized use
of radio waves, such as, but not limited to: interferences
with police communication, or strategic communication,
military installations etc.)
18
9
Signal strength
Shows how strong the signal between the
receiver and the transmitter is.
Battery status
Shows the current battery capacity.
Key Lock
When the padlock is showing the key lock is
activated. (see page 17).
Volume transmitter
The bar display and the
number beside it show
the volume on the trans-
mitter.
9
Directional microphone
setting
With the directional
microphone setting you
receive a directional
microphone aimed at a
limited area.
Transmission
Shows that there is contact between the
receiver and the transmitter. If the receiver
and transmitter are too near one another
"Too close" is displayed.
Volume receiver
The bar display and
the number beside it
show the volume on
the receiver.
9
Omni-directional
microphone setting
With the omni-direc-
tional microphone
setting you can cover
a larger area.
19