FULGOR ACCENTO Série Instructions D'installation page 12

4 - Installation Instructions
EN
STEP 3
Remove Installation Instructions (5) from the top of range and
read them carefully before you begin
6
STEP 4
Slide the range back just enough to allow the rear feet to be
installed.
8
5
STEP 5
Slide back more and tilt back (9), putting the rear legs on the
floor and then mount the front legs (10) while in this angled
position supported by the rear legs and the skid.
9
STEP 6
Remove the base while supporting the front of the range (11)
and lower to the floor in a controlled manner (12).
11
10
12