V2 LUX2+ Mode D'emploi page 12

AUXILIARY CHANNEL
The relay output is controlled by a transmitter stored on channel 4
of the receiver.
The relay output can be programmed with different operation
logics:
Mon
Steady state: the relay output is closed for the duration
of the transmission of the remote control.
Releasing the button on the remote control the relay
output is opened.
biSt
Bistable: the state of the relay output switches each time
a transmission is received from the remote control.
tiM
Timer 1: the relay output is closed when the transmission
is received from the remote control and opened after the
set time. If another transmission is received during
activation, the timer is reset.
rEL1
toUt
Timer 2: the relay output is closed when the transmission
is received from the remote control and opened after the
set time. If another transmission is received during
activation, the relay output is opened.
biSt
toUt
- 12 -