Publicité
ENGLISH
TriFlex
II
™
™
Thank you for purchasing the class D powered TriFlex
II. The TriFlex II is a three-way self-powered two-channel sound reinforcement system.
Based on a common subwoofer cabinet with a premium 15" woofer, and a pair of two-way satellite speakers with a 10" heavy-duty woofer
™
™
and a RX
14 titanium diaphragm dynamic compression driver mounted on a 75° by 75° coverage Quadratic Throat Waveguide
horn. The
TriFlex II features a bi-amped power section that provides 500 watts peak power for the subwoofer and 250 watts peak power for each
satellite speaker.
Input jacks provided are a balanced input XLR and a 1/4" phone combo jack, with a pair of RCA phono jacks available, and a Master volume
control and a Sub volume control.
Features
• 1000W Active Two-Channel Three-piece Speaker System
• One shared Subwoofer cabinet which houses the inputs and power amps
• Two two-way Satellite speakers with speaker pole stand adaptors
• Subwoofer has 15" woofer, with 500W peak available power
• Satellite speakers have 10" woofer, RX 14 1.4" compression driver tweeter
• 250W peak available power to each Satellite speaker
™
• Peavey's exclusive DDT
compression on the Satellite power amps.
• System comes with two 15 foot speaker cables
• Protective slipcover with cable storage pockets and built-in Velcro retaining straps.
• Heavy-duty locking casters on Subwoofer cabinet for transport of system
• Satellite speakers nest on top of the Subwoofer, help ease transport
• Four-pin twist-lock connectors on amplifier outputs and Satellite inputs
DESCRIPTION
The TriFlex II is a three piece, two-channel sound system, already tweaked and ready to go for sound reinforcement, DJ gigs, and
various music playback duties. Consisting of a shared Subwoofer cabinet and a pair of Satellite speakers, the TriFlex II system has been
pre-engineered for a balanced sound and a crisp, punchy presentation. The three-way effective performance that the system is capable of
provides a clear sound at high output levels, with plenty of punchy bass.
The Subwoofer cabinet has a 15" heavy-duty woofer in it, as well as the system electronics, which consists of a preamp, electronic crossover,
sub-sonic filter, and three power amps. Equipped with 3" heavy-duty locking casters, the Subwoofer cabinet can be rolled around with the
two Satellite speakers nested on top. Once in position, you can remove the Satellite speakers, flip the Subwoofer over 90 degrees onto it's
rubber feet, and the electronics controls and inputs and outputs are now readily available on the top at the rear of the Subwoofer cabinet.
The sturdy Subwoofer cabinet construction of 18 mm MDF with internal bracing, and a tough black acrylic paint finish, paired with a 16 gauge
perforated metal grille, provide good road-worthiness for years to come.
The amplifier is in a separate sub-enclosure in the Subwoofer cabinet, so the electronics are not exposed to the Subwoofer's air pressure and
vibration.
Controls and Inputs/Outputs are across the rear top of the unit when it is oriented for use, with the amplifier heatsink on the back panel.
All controls and heatsinks are recessed with no knobs sticking out or sharp heatsink edges exposed.
The Satellite speakers consist of a custom 10" heavy-duty woofer and a Peavey RX14 1.4" titanium diaphragm compression driver tweeter on
a Quadratic Throat waveguide horn. Equipped with a speaker stand pole mount, the Satellite speakers can be placed high up on a speaker
stand to get the sound out into the audience cleanly. There is also a 45° angled section on the back side of the Satellite speakers so they can
be used as floor monitors when laid on the appropriate side.
Two 15 foot 16 ga. speaker cables with the mating 4-pin twist-lock connectors on each end are supplied with the TriFlex II System to hook-up
the Satellites to the TriFlex II System electronics in the Subwoofer cabinet.
Any good quality 1 3/ 8" diameter pole speaker stands can be used with the TriFlex II Satellite speakers, and there is a specific model of
speaker stand available as an accessory that will fit into the free slipcover supplied with the TriFlex II, the model PP1 speaker stand, Peavey
part number 03011200
15
Publicité
