Chauvet DJ 4BAR LT QuadBT Manuel De Référence page 3

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of 4BAR LT QuadBT products that you can power link at each voltage, see the User Manual or
the sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Safety cable
(such as CH-05 from
Chauvet)
Hanging bracket (x2)
Bracket adjustment
knob (x2)
Footswitch Operation
Pedal
Tap pedal to
activate, then tap
Left
to navigate to
desired function
4BAR LT QuadBT QRG Rev. 4
QUICK REFERENCE GUIDE
Safety Notes.
Tripod Insertion Point
Action Function
White
Red
Green
Blue
Amber
10 preset static
colors
Pedal Action
Left Tap to navigate
(cont.) (cont.)
Tap
Right
Press and hold Fade out or in
Tap
Both
Press and hold Strobe
EN
Mounting clamp (x2)
(such as CLP-15 from
Chauvet)
Clamp hanging
bolt (x2)
Pod pan adjustment
knob (x4)
Pod tilt adjustment
knob (x2 per pod)
Function
Auto snap program
Auto fade program
Blackout
Sound-active mode
2