Comfort Zone; Moon Phase; Reset; Precautions - Oregon Scientific BAR388HG Manuel De L'utilisateur

To display the heat index, press HEAT INDEX.
•
To toggle between current / maximum / minimum
•
readings, press HEAT INDEX, then press CHANNEL
to select channel 1-3 or indoor, followed by MEM.
To toggle between temperature / humidity and heat
•
index display, press and hold HEAT INDEX for 2
seconds. Press HEAT INDEX again to stop this
feature.
NOTE If the heat index is below 80°F / 26°C, or the
desired channel is not working, the heat index will
display NA .

COMFORT ZONE

The comfort zone assesses the climate based on current
temperature and humidity measurements.
ICON TEMPERATURE
Any
20 - 25°C
(68 - 77°F)
Any

MOON PHASE

• When calendar is set press
phase for the next / previous day.
• Press and hold or
(2001 to 2099).
HUMIDITY
> 70%
40 - 70%
< 40%
or to view the moon
to scan through the years
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent

RESET

Press RESET to return the unit to the default settings.

PRECAUTIONS

This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are
a few precautions:
Do not subject the unit to excessive force, shock,
•
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
Do not immerse the unit in water. If you spill liquid
•
over it, dry it immediately with a soft, lint-free cloth.
Do not clean the unit with abrasive or corrosive
•
materials.
Do not tamper with the unit's internal components.
•
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains
no user-serviceable parts.
Only use fresh batteries as specified in the user's
•
instructions. Do not mix new and old batteries.
9