Publicité
Les langues disponibles
Les langues disponibles
8155525
NOTE: Minimize distractions in the work environment. Distractions can cause you to lose control of
the tool.
7.
Always lock up tools and keep them out of the reach of children.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1.
Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and head
protection. Always wear ANSI approved impact safety goggles, which must provide both
frontal and side protection. Protect your hands with suitable gloves. Protect your head from
falling objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator when
working around metal, wood and chemical dusts and mists. Wear ANSI approved earplugs.
Protective, electrically non-conductive clothes and non-skid footwear are recommended
when working. Wear steel-toed boots to prevent injury from falling objects.
2.
Control the tool, personal movement and the work environment to avoid personal injury or
damage to the tool. Stay alert, watch what you are doing and use your common sense.
3.
Do not operate any machine / tool when tired or under the influence of drugs, alcohol
or medications.
4.
Do not overreach when operating a tool. Proper footing and balance enables better control of
a tool in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
1.
This charger charges lead-acid batteries. It is not suitable as a DC power source, as it causes
a risk of fire and electric shock.
2.
The charger should only be plugged in to a properly grounded wall outlet.
NOTE: If the power supply needs to be extended, use a 16 gauge minimum
extension cord.
3.
Discontinue use immediately if the charger is dropped or damaged due to heavy impact.
4.
Unplug the charger when cleaning it.
CAUTION! During charging, batteries give off some gasses. Therefore, ensure good
ventilation and keep away from smoke or flame.
5.
Prevent metal objects from contacting the positive (+) and negative (-) polarities
of the charger.
WARNING! Battery acid is corrosive. Avoid contact with skin or eyes. If acid touches skin,
flush it immediately and consult a doctor.
6.
Wear protective gloves and safety glasses during use.
ELECTRICAL SAFETY
1.
Disconnect power supply. Disconnect the tool from the power supply when not in use, before
cleaning, servicing or changing any parts or accessories.
2.
Protect yourself against electric shocks when working on electrical equipment. Avoid body
contact with grounded surfaces such as pipes, radiators, cooking stoves and refrigerators.
There is an increased chance of electrical shock if your body is grounded.
Visit www.princessauto.com for more information
10/2A Battery Charger
V 3.03
3
Publicité
