Publicité
Les langues disponibles
Les langues disponibles
V 3.03
10/2A Battery Charger
SPECIFICATIONS
Output Current Rating
Works With
Reverse Hook-up Protection
Charge Rate
Application(s)
Overview
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and / or damage to the equipment. Before
allowing someone else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. Common sense and caution are factors
that cannot be built into this product, but must be supplied by the operator.
NOTE: Keep this manual for the safety warnings, precautions, inspection and
operating instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean and well lit.
2.
Do not use in the presence of flammable gases or liquids.
3.
Use the charger in a well-ventilated and dry place free from direct sunlight and corrosive
gasses or heat sources.
4.
Do not expose the charger to rain or snow.
5.
Place the charger as far as possible away from the battery, in a stable position.
WARNING! It is unsafe to directly place the charger on the battery or vice versa.
6.
Keep anyone not wearing the appropriate safety equipment away from the work area.
2
Detects current battery charge level and automatically adjusts
the output
12 volts
Yes
2/10A Charger (2A slow / 10A peak)
Auto, Marine, RV, Farm, Powersports, Utility
The charger cycles on and off when finished charging to maintain a
full charge
For technical questions call: 1-800-665-8685
8155525
Publicité
