Conceptronic CBTHS2 Guide De Démarrage Rapide page 15

ENGLISH
headset is connected to. Please refer to the users' manual of the devices for the specific
operation. This Passkey cannot be altered.
Paired devices remain paired even when:
One of the devices is not powered on.
-
A service connection is interrupted or the service stopped.
-
One or both devices are rebooted.
-
C: Frequently Asked Questions
1. Why doesn't the Conceptronic Earbridge headset work with my mobile phone after the
headset has been fully charged and switched on?
A: You have to activate the Bluetooth function of your mobile phone first and pair it with the
Headset.
2. Does the Conceptronic Earbridge headset work with all types of mobile phones?
A: No. It works only with Bluetooth enabled mobile phones. Your Bluetooth phone must
support HEADSET or HANDSFREE profile.
3. What is the operation distance between the Conceptronic Earbridge headset and a
Bluetooth mobile phone?
A: The Earbridge has been tested and approved by BQB. It is fully compliant to Bluetooth v.
1.1, class II, with HEADSET and HANDSFREE Profile. The maximum operation distance can
be up to 10 - 20 meters, however it will be affected and shortened by different circumstances
and different brands of mobile phones. Some mobile phones are with less operative distance.
4. When my mobile phone was searching for the Earbridge, why did several Bluetooth
devices appear on my mobile phone?
A: Most Bluetooth enabled mobile phones with Bluetooth function activated can search for
more than one Bluetooth device within operative range. The Headset will appear as
"Earbridge" "Unknown Device" or will show the physical address of the device at your mobile
phone after having been found.
5. Why can't my mobile phone find the Conceptronic Earbridge headset?
A: If the Earbridge is not in pairing mode, your mobile phone will not find the headset. Please
put the earbridge into pairing mode before starting your phone to search for the
Headset. (Please refer to the User Manual for detailed instructions.)
6. Do I need to pair the Conceptronic Earbridge headset with my mobile phone every time I
use it?
A: No. Once the Pairing is set up between the two devices, they will remain paired even
when one or both devices are powered off.
7. Why is there is a disturbance noise coming from the Conceptronic Earbridge headset?
A: The performance of the Headset will be affected by two factors: