LINDR PYGMY 20 Green Line new Mode D'emploi page 19

11.2 Outlet for Beverage
Screw an F 5/8" x 3/8" (9,5 mm) speed fitting onto the keg coupler.
12. BEVERAGE SUPPLY CONNECTION AND PRESSURISATION
12.1 Connection and Pressurisation by Built-In Compressor (One-Tap Device):
PYGMY 20/K Green Line new, PYGMY 25/K Green Line new, PYGMY 35/Kprofi Green Line new,
KONTAKT 40/K Green Line new, KONTAKT 40/Kprofi Green Line new, KONTAKT 70/K Green
Line new, KONTAKT 155/K Green Line new
1. Beverage inlet
2. Air outlet
3. Compressor switch
4. Keg coupler (A-system, S-system,
M-system)
12.2 Connection and Pressurisation by CO
PYGMY 20 Green Line new, PYGMY 25 Green Line new, KONTAKT 40 Green Line new, KONTAKT
70 Green Line new, KONTAKT 155 Green Line new
1. Beverage inlet
2. Keg coupler (A-system, S-system,
M-system)
3. F 5/8x9.5 mm speed fitting
4. F 5/8x8 mm speed fitting
12.3 Connection and Pressurisation by Built-In Compressor (Two-Tap Device):
KONTAKT 40/K Green Line new, KONTAKT 40/Kprofi Green Line new, KONTAKT 70/K Green
Line new, KONTAKT 155/K Green Line new
1. Beverage inlet
2. Air outlet
3. Keg coupler (A-system, S-system,
M-system)
4. F 5/8 x 9.5 mm speed fitting
Only for models with built-in air compressor PYGMY 35/Kprofi Green Line new,
PYGMY 20/K Green Line new, PYGMY 25/K Green Line new, KONTAKT 40/K Green Line new,
KONTAKT 70/K Green Line new, KONTAKT 155/K Green Line new.
The air mini-compressor is built into the cooling device itself. Automatic pressure regulation
is set to 2.8-3.2 bar. K profi models allow smooth pressure regulation in 1.0-3.4 bar range. The
set pressure will be displayed on the pressure gauge in bars. The compressor can be turned
off separately with a switch. The air outlet from the cooler terminates in a 5/16" (8 mm) speed
fitting marked AIR. The air compressor is zero-maintenance, fitted with a molecule filter for
12.4 Connection and Pressurisation by Classic CO
KONTAKT 40 Green Line new, KONTAKT 70 Green Line new, KONTAKT 155 Green Line new
1. Beverage inlet
2. Keg coupler (A-system, S-system,
M-system)
3. F 5/8 x 9.5 mm speed fitting
4. F 5/8 x 8 mm speed fitting
5. F 5/8x9.5 mm speed fitting
6. F 5/8x8 mm speed fitting
7.
Bottle (One-Tap Device):
2
5. Pressure regulator for CO
6. F 7/16 x 8 mm speed fitting
7.
5. F 5/8 x 8 mm speed fitting
6. Y 8 x 8 x 8 mm speed fitting
7. Beverage
8.
Built-In Air Compressor
the drawn-in air.
Bottle (Two-Tap Device):
2
5. Y 8 x 8 x 8 mm speed fitting
6. CO
7. F 7/16 x 8 mm speed fitting
8. Beverage
(see Fig. 12.)
Beverage
Beverage
Compressor switch
pressure reducing valve
2
:
mini bottle
2
19
EN