BSVILLAGE PISCINE T control 1 Mode D'emploi page 17

[OPERATION AND MAINTENANCE HANDBOOK
]
[V-1.16]
The frost function is an important protection that your Tcontrol runs on its own. With any setting
(filtering on 1 or on 0 or on T or on A) if the water temperature drops below 3°C your Tcontrol starts
the frost function. AG appears on the display.
This function consists in turning the filtering system on for 3 minutes every hour, day and night. This
procedure allows you to protect the pumps and the hydraulic system and avoid ice from forming
in the pool.
TECHNICAL DATA
Power supply: 230 Vac 50Hz
Maximum draw: 4.5 Kw
Maximum filtering output load: 2.7 Kw
Maximum hydro output load: 1.6 Kw
Protection rating: IP 65
Operational conditions: between -10°C and +40°C
Measurements: 300 x 240 x h140 mm
Weight: 3.5Kg
Material: ABS
Certification: EC
AQUA spa 17