Publicité
Les langues disponibles
Les langues disponibles
To access the filtering pump control menu, press FILTER
Pump off
Pump on
On/off Timer settings to cover 24 hours
To set the timer, press ENTER now and follow the instructions provided below
Operation in automatic mode: depending on the data read by the temperature probe, the device
automatically controls when filtering starts up.
See table A to know the pre-set daily filtering times
massaging water jet
Press
timer
at that time. The operating principle is the same as with mechanical timers with tappets. When you have
setting
finished setting all of the times, press ESC to exit programming
Always off at 12
On for the first half hour at 12
On for the second half hour at 12
Access for the entire hour at 12
Table A (rev.10)
Water temperature
between 3°C and
Mode A1
15°C
Water temperature
between 16°C and
Mode A2
20°C
Water temperature
between 21°C and
Mode A3
25°C
Water temperature
between 26°C and
Mode A4
30°C
Water temperature
from 31°C and
Mode A5
higher
NOTE: Tcontrol processes an average of the day's temperatures, and changes the MODE at midnight
9. Level
Automatic level display
Low level: the level-control solenoid valve is open
Normal level: the level-control solenoid valve is closed
Fitted with anti-wave system, which is able to stop the solenoid from opening and closing
unexpectedly.
10. Frost function
[OPERATION AND MAINTENANCE HANDBOOK
or
to move to the hour that you wish to change, then press ENTER to enable switching the lights on
1 hour of daily
filtering
3 hours of daily
filtering
6 hours of daily
filtering
9 hours of daily
filtering
13 hours of daily
filtering
]
[V-1.16]
Filtering from 14:00 to 15:00
Filtering from 9:00 to 10:00 – from 12:00 to 13:00 –
from 15:00 to 16:00
Filtering from 8:00 to 9:00 – from 11:00 to 15:00 –
from 19:00 to 20:00
Filtering from 8:00 to 10:00 – from 12:00 to 17:00 –
from 19:00 to 21:00
Filtering from 8:00 to 11:00 – from 12:00 to 19:00 –
from 20:00 to 23:00
AQUA spa
16
Publicité
