Troubleshooting - Beem Cucinetta Fire & Sun Mode D'emploi

BEEM - Elements of Lifestyle
The following table helps in localising and remedying minor faults. If you cannot resolve the
problem with the following steps, please contact customer service.
Fault
Display does not switch
on.
The fuse in the
fuse box was tripped.

Troubleshooting

Possible cause
Circuit breaker in fuse box
switched off.
Control indicator defective.
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Remedy
Switch on fuse.
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
EN 23