Blumfeldt Urban Bamboo Mode D'emploi page 23

Step 3: Installation and use of tank:
Remove the tank cap and add water and nutrient solution to the tank. Detailed
information on the concentration of the nutrient solution can be found in the
chapter PLANTING AND GROWING.
Tankdeckel
1
Wasserpumpenkabel
Tank
Place the tank (water pump cable and water pump extension cable are on the
2
same side) on the base plate in the frame and connect the water pump cable to
the extension cable.
The light switch is located on the back of the unit and is used to switch the LED
3
plant light on and off.
Close the power supply and start planting.
4
Switch
DC socket
Front
EN
23