Krups PREP EXPERT S9000 Mode D'emploi page 14

The functions of your
appliance
When starting your machine, make sure that
the cord is not taut, in order not to influence
or disturb the weight reading.
. WEIGHING FUNCTION
This function enables you to dispense with
separate scales and weigh your ingredients up
to a total of 4 kg.
• Place the machine on a clean, horizontal
work surface.
• Place the stainless steel bowl (b1), the
assembled blender (d), the assembled mini-
chopper (f) or the assembled grinder (g) in
position.
• Press the Zero (tare) button (a10); "0" will
appear on the display (a11). Fill up to the
desired amount.
• To weigh each ingredient separately, press
the Zero (tare) button (a10) each time to
reset to zero.
. TIMER FUNCTION
This function enables you to:
1- Measure the processing time: once the
ingredients are weighed and the accessory
cover in place, the seconds counter will start
to run as soon as you turn the speed control
(a1), enabling you to measure the time
required to obtain the required result.
2 - Program an operating time up to 16
minutes. To this end:
Once the ingredients are weighed and the
accessory cover in place, press the
button (a12) of the timer; the display
(a11) will show 0.
To set an operating time, press the
to increase the setting or the
reduce it (a12).
- For longer times, hold down the button
pressed and the setting will change more
quickly.
- For shorter times or fine adjustment,
press button or button
times .
18
hambourg Gb.PM6.5
- To set a time more quickly, hold down
button
desired time is shown .
time of 16 minutes to zero, press button
maximum time of 16 minutes, press
button
and button
As soon as you turn the speed control knob
(a1), the display will show the time counting
down and the appliance will stop after the
elapse of the programmed time.
The appliance can also be stopped at any time
by turning the speed control knob (a1) back
to 0.
2 - MIXING / KNEADING / BEATING /
EMULSIFYING / WHISKING (c)
Depending on the nature of the ingredients,
the bowl (b) with its cover can be used to
prepare up to 2 kg of dough.
A
CCESSORIES USED
. Bowl (b1),
. Cover (b2),
. Kneading hook (c1), Mixing blade (c2) or
Whisk (c3).
F
ITTING ACCESSORIES
• Press button (a3) to release the
multifunction head (a4) and raise it to a
vertical position.
• Fit the bowl (b1) onto the appliance by
or the
turning until it locks in position and place
the ingredients in it, weighing them as
indicated under the WEIGHING function (see
figure 2.1).
button
button to
• Position the cover (b2) on the head (a4) with
the filling opening at the front of the
appliance (see figure 2.1).
• Fit the desired accessory (c1, c2 or c3) in the
power outlet (a7), pushing the shaft of the
accessory home and turn it a quarter turn
towards you to lock it in position (see figure
briefly several
2.2).
• Lower the multifunction head of the
appliance (a4) to a horizontal position and
18
or button pressed until the
- To jump directly from the maximum
for 2 seconds .
- To jump directly from zero to the
for 2 seconds .
- To cancel a time setting, press button
together for one second .
:
8/08/06, 13:52