Operating Instructions; Overview; Application; After Use - APA 32302 Manuel De L'opérateur

6. OPERATING INSTRUCTIONS

6.1 OVERVIEW

1 Outer side, re ective
2 Inside, insulating
3 Handle bar
4 Handle
Image 1: Overview

6.2 APPLICATION

Remove all objects from the dashboard and windscreen.
Very high temperatures can occur between the wind-
screen and the sunshade in direct sunlight, which can
damage the objects.
Take the parasol out of the storage bag (position 7 in the overview).
Loosen the strap with the Velcro fastener (position 6 in the overview).
Hold the handle (position 4 in the overview) with one hand, push the
lock (position 5 in the overview) on the handle bar (position 3 in the
overview) upwards until it engages.
Position the lower long side of the sunshade at the very front of the
dashboard. Secure the upper long side of the sunshade Secure the
upper long side of the sunshade by folding down the sunshades of
your of your vehicle (Fig. 3).
Image 3: Sunshade in the vehicle
Make sure that the parking disc, parking permit, disabled
person's badge etc. are still visible from the outside.
5 Latch
6 Strap with Velcro fastener
7 Storage bag

6.3 AFTER USE

Remove the parasol from the dashboard. Hold the handle with one
hand, press the button of the lock with the other hand and pull it
towards the handle. Carefully fold the fabric and the pole. Fix the
folded umbrella with the strap with Velcro. Slide the handle over the
ends of the poles (picture 4).
Image 4: Push the parasol together

7. MAINTENANCE AND CARE

When used as intended, the sunshade is maintenance-free. Always
keep the sunshade in its bag. This avoids damage to the re ective layer
and protects the sunshade from dirt.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Dispose of the sunshade in accordance with local regulations.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5