Adjusting The Product's Temperature; Adjusting The Product's Operation Time; After Using The Product - RICHWAY BIOMAT Mini 7000mx Manuel De I'utilisateur

Adjusting the product's temperature

1.
When the power is turned on, press the
• Range of temperature:
Mini: 104° ~ 158°F / 40° ~ 70°C
Professional / Single / Queen / King: 95° ~ 158°F / 35° ~ 70°C
• Each time the temperature button is pressed, the temperature setting changes in increments
of 9°F / 5°C.
2.
When adjusting the temperature, the indicator light will change color depending on the temperature
selected. Once selected, the Biomat will heat up to the proper temperature. If the button of the controller
is not working properly, please contact our Customer Service Center.
• Blue: 95° ~ 104°F (35° ~ 40°C)
• Green: 113° ~ 122°F (45° ~ 50°C)
• Orange: 131° ~ 140°F (55° ~ 60°C)
• Yellow: 149° ~ 158°F (65° ~ 70°C)
3. Once selected, the Biomat will heat to the proper temperature, and the EDNI light will begin to flash
(Professional / Single / Queen / King sizes only).
 Always cover the Biomat with the cotton pad to prevent burns or injury to your skin.
To prolong the life of the Biomat, use the waterproof cover. Place the waterproof cover
Caution
over the cotton pad.

Adjusting the product's operation time

1.
After setting the temperature, press the
• Range of operation time: 2 / 4 / 8 / 12 hours
• Factory default setting: 8 hours
• The timer indication light will decrease according to the time lapsed.
2.
Selected time will be indicated by a light next to it.
3.
When the set time has lapsed, the Biomat will stop and the power is automatically turned off.
 If the timer is set for 8 or 12 hours at 131°F (55°C) or higher, the Biomat will automatically
decrease the temperature to 113°F (45°C) or below after 4 hours of use. When the set
Safety
time is reached, the power will turn off.

After using the product

- After using the Biomat, turn it off by pressing the Power button.
- When the power is turned off, unplug the Biomat from the outlet.
13
[Temperature Up / Down]
[Timer] button to set the desired operation time.
button to set the desired temperature.