How To Use The Product; Turning On And Off - RICHWAY BIOMAT Mini 7000mx Manuel De I'utilisateur

How to use the product

Turning ON and OFF

Check the following to make sure the Biomat is operating properly.
Mini
The Mini Biomat is designed for the purpose of covering the abdomen. It can also be utilized on areas
where muscle pain is experienced such as the shoulder or leg.
1.
Turn the Biomat on by pressing the Power button on the controller. The EMF light will turn on.
2.
If the light does not turn on, check for any plug/power system problems.
3.
Press the temperature adjustment button to see if it is working properly. Contact our Customer
Service Center if the controller is not working properly.
Professional / Single / Queen / King
The Professional / Single Biomat is designed for one-person use. The Queen / King Biomat is designed for
two-person use. The left and right sides of the Queen / King Biomat can be adjusted independently. The
temperature and usage time can be set independently to save energy.
1.
Press the power switch on the side of the controller to the (-) direction to turn on the power.
2.
Turn the Biomat on by pressing the Power button on the controller.
3.
Press the temperature adjustment button to see if it is working properly. Contact our Customer
Service Center if the controller is not working properly.
Please contact our Customer Service Center if the E.M.F. light does not turn on
E.M.F. Light
when the power is connected.
If the 158°F / 70°C LED light is flashing after turning on, check if the controller and
mat are properly connected. To ensure a secure connection, make sure there is no
space between the connecting points.
Light
Flashing
If the power still does not turn on after using the methods stated above, please
contact our Customer Service Center.
Recommended usage:
 Use for 40-60 minutes per day at 149°F~158°F/ 65°C~70°C.
 We recommend first time users to start at a low temperature and work your way up.
 Always drink water before and after intensive hyperthermia treatment.
• The connection may be tight at first.
• If the power does not turn on, unplug and re-connect the power plug again.
• If the power does not turn on, make sure the controller and outlet voltage are
the same.
12