K-Box A7 User's Manual
Step 9
Close the opto-coupler cover. Put back the protection covers for the
phase and neutral terminals (IMAGE 8). Ensure the orientation of the
covers (IMAGE 9).
Step 10
Put back the cover panel of the home distribution box to cover the elec-
trical contacts. Be sure that no electrical contact can be touched.
Step 11
Power on the system by enabling power in the electrical panel.
Step 12
To finalize the installation, all tiko devices must be configured using the
installation app.
Device Operation
The operation of the K-Box is subject to the control of the full system and operated by
the Data Center through the Gateway (M-Box). No user interaction is required.
On the front, there are two buttons, offering the following functionalities:
•
Service – not used anymore (no function assigned)
•
Heating Powered
o
LED Explanation
On the front, there are two green LEDs indicating:
•
Link – on if connected via Gateway (M-Box) to backend
•
Second LED – status of opto-coupler. Behavior is custom and subject to project
specifications.
tiko Energy Solutions AG
Long press (10 s) – reset device.
English
Operation
6 / 44
IM-0005-0004 Rev. 7