tiko Energy Solutions K-Box A7 Mode D'emploi page 4

K-Box A7 User's Manual
Intended Use
K-Box is a custom energy meter with remote controlled opto-coupler to be only used in
tiko Energy Solutions AG authorized setups. The output of the opto-coupler shall be con-
nected to a receiving unit able to decode the K-Box-A7 signaling.
Any installation or usage which does not conform to tiko Energy Solutions AG setup is
strictly forbidden. tiko Energy Solutions AG is not responsible for any improper installa-
tion/usage of this device.
Features
K-Box features:
•
meters instantaneous energy consumption on 3 phases in both directions (con-
suming and generating)
• remotely controlled opto-coupler to send signals to a connected device
• LEDs showing connection and opto-coupler status.
Package Content
Open the package and check that you have all the following items:
• Instruction manual
• K-Box
If any of the parts are incorrect, missing, or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 1 shows the device from the front. IMAGE 2 shows the device from the bottom
and indicates the phases and neutral terminals.
On the bottom side is a label indicating
• The manufacturer
•
The device model number (REF) and the current rating
• The hardware (HW) and firmware (FW) version
• The unique serial/MAC address as text and as barcode code (SN/MAC)
tiko Energy Solutions AG
English
Overview
4 / 44
IM-0005-0004 Rev. 7