Publicité
Les langues disponibles
Les langues disponibles
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one GU10 230V/50W lamp.
During operation, the lamp reaches temperatures of up to 205° C.
Procedure:
Step 1: If replacing the lamp, remove the old lamp from the lamp-socket.
Step 2: Screw the new GU10 230V/50W lamp into the lamp-socket.
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the lamp. Maintenance and service operations are
only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Fitting lamps:
GE GU10 230V/50W 2000h Spot
OMNILUX GU10 230V/50W 1500h 25°
OMNILUX GU10 230V/50W 1500h 25° + C
Maximum ambient temperature t
Maximum housing temperature t
Please note: Every information is subject to change without prior notice. 05/02 ©
All manuals and user guides at all-guides.com
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
DANGER TO LIFE!
230 V AC, 50 Hz
65 W
195 x 195 x 180 mm
0.7 kg
No. 88542000
No. 88542005
No. 88542505
:
45° C
a
(steady state):
205° C
B
8
Publicité
