Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATinG YOUR WHEELBARROW
W a R N I N G
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the groove
inside the tool and latches into place properly. improper installation of the battery pack can cause
damage to internal components.
TO REMOVE BaTTERY PaCK
• Depress the latch on the back of the battery pack to release the battery.
• Remove the battery pack.
LOCK/UNLOCK THE BRaKE (See Figure 4)
• Step on the brake, the brake will be locked, and the Wheelbarrow will stop.
• Step on the brake again, the brake will be unlocked.
STaRTING (See Figure 5)
• To utilize your Wheelbarrow set the power switch to the on position.
• The LED light indicates the wheelbarrow is in working condition.
Power switch
LED light
13
Brake
FIG. 4
FIG. 5
Publicité
Chapitres
Table des Matières
Dépannage
