Baxtran BR80 Manuel D'usager page 21

7. CALIBRATION
Step Operation
1
Press
Press
2
Press
3 Load the
standard weight
for F·S on the
platform, press
Calibration must be done once the parameters are configurated.
Pressed three times during calibration or configuration, the indicator will display. To view the A/D counts,
press the key when
8. ZERO
When the weight is stable, press
status LED is turned on.
9. TARE
9.1 Digital tare.
Press key, set tare with
is turned on.
10. MANUAL WEIGHT ACCUMULATION
When weight is stable, press
of accumulation will be displayed for
11. AUTOMATIC MEMORY ACCUMULATION
Selection of manual/automatic accumulation function (Selection of manual / automatic print function).
Selection of animal scale, peak value retain and counting function.
Step Operation
1
Press
2
Press
BR80 and BR90 indicators user manual
Displaying
is displayed. Press the
key for two seconds to set the zero point and zero the display. The
and key, then press
key to accumulation the current weight to the total weight. The total number
1.5 seconds.
Displaying
Comments
Enters calibration.
Zero the scale.
Starts zero calibration and wait for calibration to
complete.
Starts calibration and wait for calibration to
complete.
key to return to weighing mode.
key. The input data is tare. The status LED
Contents
To display times of accumulation.
The selection of manual/automatic accumulation
AUt = 0, manual accumulation
AUt = 1, automatic accumulation and print when
weight is added,
AUt=2, automatic memorize displayed value when
weight is added. Accumulate and print final stable
values after load down to below 20 d.
indicator is lit.
AUt=3,dynamic weighing method. At weighing >20d:
the buzzer sounds "du" and lock is displayed for 6
seconds. Then lock is released for weighing <20d;
automatic accumulation and print. Suggest Flt>30.
indicator is list.
AUt=4, peak value fixed weighing method. At
weighing>20d, the buzzer sounds "du" and lock is
displayed. When weighing <20d, fixed data displays
21
indicator is lit.