Publicité
Les langues disponibles
Les langues disponibles
6. CONFIGURATION
Connect load cells to the indicator and set following configuration parameters.
Step
Operation
1
Press
and
at same time
2
Press
Press
Press
3
Press
Press
4
Press
Press
Press
Press
Press
5
Press
Press
Press
Press
Press
6
Press
Press
Press
Press
7
Press
8
Press
Press
9
Press
* Note: one time accumulation is allowed for weighing once. Following accumulation is allowed for weighing
only when displayed value is below 20 d.
BR80 and BR90 indicators user manual
Displaying
Self test from
, to
Contents
In power off states, press
check, and displaying
second.
Enter of the scale.
Enter the configuration setting modal.
The number of scale divisions selected.
1 / 2 / 5 / 0.1 / 0.2 / 0.5 / 0.01 / 0.02 / 0.05 / 0.001 /
0.002 / 0.005 / ...
For example: d=0.1
Sets scale F·S
Moves the digit at right.
For example: F·S=3000
Sets display Filter parameters: 00-99
The display will updata faster and filter faster as the
filter parameter is changed from 99-00.
For example: FLt=30
Sets automatic power off function.
AUtP=00 Not automatic power off.
AUtP=01 Automatic power off.
Digit express the choice of zero trace range (0-9):
1:0.4d 2:0.8d 3:1.2d 4:1.6d 5:2d 6:2.4d
7:2.8d 8:3.2d 9:3.6d.
Decimal digit express the choice of zero set 0.
Decimal digit=0 no zero set at start operation.
Decimal digit >1 zero set at start operation 20%
F·S.
For example: AUtP=10
(AUtP=10 when leaving the factory)
Continuous output: Adr=00
Baut rate range: 1200 → 2400 → 4800 → 9600
For example: b=4800
Press to confirm configurations and go to
calibration menu.
20
to turn on, segment
edition No 1.5
Publicité
