Publicité
Les langues disponibles
Les langues disponibles
starting the encoding mode.
3) Start playback of cassette tape which the track you prepare to record.
4) After finish of recoding, press and hold the " Record " button (6) until the LCD stop flashing and
return to "tape" mode.
D) Encoding bitrate (by remote handset)
You can select the desired bitrate during encoding, the higher bit rate will generate better sound
quality and occupy more space of memory. The selectable range is from 32/ 64/ 96/ 128/ 192/ 256
kbps respectively-
2) Set in "Phono" function (15) & remain stop mode.
3) Press the "Info" function and the LCD display (18) will show the default bitrate (128 kbps)
4) Press skip
/
5) Press again the "Info" to confirm the setting and the LCD display (18) will resume to "Phono" mode
E) Track separation (by remote handset)
You can divide the recording music from phono or tape to USB/SD track by trace during encoding.
Every time when press the "
from phono or tape to USB/SD, the system will generate a new track and continuous the recording.
The text "Phono" or "Tape" at LCD display will flashing one time, it mean the unit is creating a new
track successfully.
File Delete at USB / SD Card (by Remote Control)
The system is able to erase the file stored inside the USB pen drive or SD card by following:
A) Single file delete
1) Select at " USB " or " SD " mode.
2) Press and hold the " Info " button for 3 seconds and the LCD display (18) will show (del ---001)
3) Press Skip forward
4) Press the " REC" button to enter " yes / no " mode and then press Skip forward
ward
to select " yes " or " no ".
5) Press the " REC " button again to confirm the setting.
B) All files delete (by remote control)
1. Select at " USB " or " SD " mode.
2. Press and hold the " Info " button for 3 seconds and the LCD display (18) will show (del ---001)
3. Press and hold the " Info " button again to enter " FORMAT 7N " mode and then press Skip forward
or Skip backward
4. Press the " REC " button again to confirm the setting.
Remark :
- All the files inside the USB storage media or SD card will be deleted completely after confirming
to "yes" mode.
-
Press " Stop " button once at remote handset to quite delete mode
Removing of USB / Memory Card
To remove the USB / memory card, turn off the power or switch the function mode to either cd, tape
or tuner first. For USB port – un-plug it by pulling out the USB socket directly, for memory card – just
pull out the SD card directly without bending.
buttons (3) to select the desire bitrate for encoding.
" (track separation) button once at remote handset during encoding
or Skip backward
(3) button to select " Yes " or " No "
button to select the file going to delete
or Skip back-
17
Publicité
