Publicité
Les langues disponibles
Les langues disponibles
A) CD encoding
I) recording 1 track
1. Play the CD track you want to encode/record, as normal.
2. Press " Record " button (6) during the playback of the desire track, unit will display
and flashing. Encoding is performing now.
3. After the encoding process has finished, the unit will stop playback automatically.
II) Recording the complete CD
1. Place a CD with the printed side facing up inside the CD tray & then close the cd door.
2. Press the " Record " button (6) after focus search completed. Unit will display
and flashing. Encoding is performing now.
3. After the encoding process has finished, the unit will stop playback automatically.
III) encoding by program
1. Place a CD with the printed side facing up inside the tray & then close the co door
2. Select the desire tracks by following "CD disc programming" procedures. Then press "CD Play/
pause/stop " button (2) to start playback.
3. During CD playback, press and hold the " CD Play/pause/stop " button (2) for 2 seconds to enter
the stop mode.
4. Press the " Record " button (6) and the unit will display
performing now. After completing of encoding, unit will stop playback automatically.
Remark:
The recording speed is 1:1 and according to the actual plying time of the CD track.
The system will create a " audio " folder and then store the encoding track in it.
The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz.
No song title will be recorded during encoding mode.
To interrupt the recording, press the " Record " button again during record mode.
Recording will be completed only entire song being encoded, if terminate the encoding pro-
cess intermediately, there is no track being recorded nor stored to the USB or SD/MMC card
IV) copying of mp3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB or SD/MMC card
if press the " Record " button (6). The operation procedures is same as CD encoding as stipulate on
above, and the system will switch to copying mode only if mp3 file being read.
Remark:
- The system will store the file to USB source first if both USB and SD slot are being occupied by
storage media.
- If press the " Record " button during playback of USB or SD source, the file will copy from USB to
SD or SD to USB.
B) Phono encoding
1) Set the function button (15) to "phono" position and then press the "record" button (6) directly.
2) The LCD display (18) with show the word "USB" and flashing, after then display
flashing. Now the system is starting the encoding mode.
3) Start playback at phono for the track which you want to record to USB.
4) After finish of recoding, press and hold the "record" button (6) until the LCD stop flashing and
return to "phono" mode.
C) Cassette encoding
1) Set the function Selector (15) to "Tape" mode and then press the " Record " button (6) directly.
2) The LCD display with show the word "USB" or "CARD" and
&
and flashing. Encoding is
and flashing, now the system is
&
&
&
and
16
Publicité
