Publicité
Les langues disponibles
Les langues disponibles
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Intro play (by remote control)
You can listen the beginning (10 seconds) of each track in a cd by this function & saving your time
to search the desire song
Random play
You can listen all the tracks or folder in a random order by this function
CD disc programming (by remote control)
Up to 32 tracks can be programmed for CD or MP3 file and play in any order. Before use, be sure the
system is at stop mode before programming:-
1. Set in CD/USB mode & stop the CD playback.
2. Press the Program" button, " PROG " will appear on LCD display (18). Moreover, it will indicate
program no. and digits for track no. To be programmed.
3. Select a desired track by pressing skip
4. Press the " Program " button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press CD " Play/pause/stop " button (2) to play
the disc in assigned order.
7. To cancel the programmed file, press "stop" button on remote handset until " PROG " is disappear
on LCD display (18)
Playback of MP3 song via USB or memory card
Connecting
The system is able to decode and playback all MP3 file which stored in the
memory media with USB connecting port or SD/MMC memory card.
1. Set Function selector (15) at USB/SD position and then press source
button (5) to select " USB or card" mode.
2. Plug-in the USB plug with the face up & make sure it going into com-
pletely or insert the memory card in the direction of the arrow as shown in
the label on the underside of the memory card slot. Insert straight
without bending.
•
Connecting the USB upside down or backwards could damage
the audio system or the storage media (USB thumb drive/SD/MMC
card). Check to be sure the direction is correct before connection.
3. The system will start reading the storage media automatically after connecting, and LCD display (18)
will show the total number of MP3 files and total number of folder being detected.
4. Repeat the same playback procedure as playing CD/MP3 disc as above
Remark
- The system can detect and read the file under MP3 format only though the USB port.
-
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some
MP3 player may not be able to play via the USB socket. This is not a malfunction of the system.
Encoding of CD/Phono into MP3 File
The system is able to encode CD/ record (from phono) file (from tape) to MP3 format and recording
at memory media with USB connecting port or SD/MMC card.
or
buttons (3).
15
Publicité
