Alecto AK-40 Guide De L'utilisateur page 31

Wake-up time setup:
Press the "ALARM" button to adjust the alarm time. Alarm time
starts flashing. Use the "+" and "-" buttons to set the desired
wake-up time.
Press the "ALARM" button for 3 seconds to set the alarm
minutes. Press the "ALARM" button to set the alarm time.
When you don't press any button for 15 seconds after setting
an alarm time, the device will leave the alarm setup menu. The
wake-up time is now set.
To activate the corresponding wake-up time, slide the desired
"ALARM" switch upwards. The alarm clock icon will appear in
the display.
To stop the wake-up signal:
As soon as the wake-up time is reached, the clock will sound an
alarm signal.
For the first 10 seconds, the alarm signal has a low volume. In
between 10 and 20 seconds, the volume increases. From 20
to 30 seconds the volume is even higher and after 30 seconds
the alarm signal volume is the loudest. The alarm signal will
continue for up to 180 seconds.
Press any button within those 180 seconds to stop the alarm.
The alarm signal will start again after 24 hours, in accordance
with the set wake-up time, or you may slide the "ALARM ON/
OFF" switch of the concerned alarm to "OFF" to fully switch off
the alarm clock.
-31-