General Oven Information - FULGOR SOVB Manuel D'utilisation Et D'entretien

Before using your oven for the first time remove all
packing and foreign materials from the oven(s). Any
material of this sort left in the oven(s) may melt and/ or
burn when the oven(s) is(are) used.
Flashing Symbols or Numbers
Signals an incomplete setting and calls for another input.
Beeps
Signals that more information must be entered or
confirms the receipt of an entry. Beeps also signal the
end of a function or an oven fault.
Fast Preheat
Whenever the oven must heat rapidly, turn the cooking
mode selector to fast preheat position. As soon as the
preheat tone is sounded and the red light turns off, select
the desired cooking mode and put food inside.
Lock Symbol
It's displayed when the door is locked, during the Self-
Clean mode or following cooling down. The symbol
flashes when the latch is moving to lock or unlock the
door. Do not attempt to open the door. Door can be
opened when the symbol no longer appears.
Safety door lock
The door latch mechanism is not used only to lock the
door in self-clean but also to lock the door manually for
safety reasons (to prevent children from touching hot
parts) during ordinary cooking activities.
Single oven: hold both the INC (+) and LOCK keys for 3
seconds. The latch will lock the door. Repeat the same
operation to unlock.
Double oven: hold both the INC (+) and DEC (-) keys for
3 seconds. The latch will lock the door. Repeat the same
operation to unlock.
Power Failure
After the power returns to the oven, the clock displays
AM
the time 12.00 .
Default Settings
The cooking modes automatically select a suitable
temperature when the selector is in the preset position.
These can be changed when a different one is needed.
F Failure Number Codes
These codes are displayed when the electronic control
detects a problem in the oven or in the electronics.

General Oven Information

Convection Fan
The convection fan operates during any convection
mode. When the oven is operating in the convection
mode, the fan will turn off automatically when the door
is opened. The convection fan will run during the
preheat time
Component Cooling Fan
Activates during any cooking or self-cleaning mode to
cool inner components and outer door surfaces. This
air is exhausted through the vent located above the
oven door. It continues to run until components have
cooled sufficiently. The cooling fan speed is high in
self-clean and whenever the internal components
temperature becomes high.
Use & Care Manual
Models SOVB - DOVB ENGLISH
9