Publicité
Les langues disponibles
Les langues disponibles
contained tracks) and RAN (play track is randomized order).
•
Playlist: In STOP mode, press PROG to create a playlist. Use the arrow buttons to select the first track,
confirm with PROG. Repeat this procedure to add up to 20 tracks. Press PLAY/PAUSE to play. Pressing
STOP or opening the CD tray or selecting another mode will aport programmed play.
Insert a USB or SD drive into the appropriate socket. After selecting the respective mode, the number of
contained folders and files will be shown on the display. Use the convenient buttons PLAY/PAUSE, NEXT/
BACK, F+10/-10 and STOP to navigate through your media library. Playmode and playlist functions are as
stated in the CD operation section above.
Use MODE to toggle to BT mode. Activate BT on your smart device and pair with JUKEBOX. Use your exter-
nal device to play back your media. You can disconnect by switching to another mode or by unpairing your
smart device.
•
Slide the AUX/PHONO switch on the rear to PHONO position, when you want to use the record player.
•
Toggle to PHONO mode with the MODE button. Adjust the rotation speed with the speed switch nect
to the tone arm holder.
•
Placa a record on the platter. Use the spindle adaptor (puck) if needed.
•
Take the tone arm off the holder and carefully move it to the desired track on the record before letting
it touch down slowly.
•
Place the tone arm on the tone arm holder after the record has finished.
Please note: If the auto stop area of the record is smaller than usual, switch the auto stop function off.
Connect external media players (MP3 player, smartphone, laptop, etc.) to the AUX cable on the rear. Slide
the AUX/PHONO switch to AUX position. Use your external player to operate playback.
Press LIGHT to toggle light on/off. The light effects cycle through continuously as long as the LIGHT MODE
switch on the rear is on PLAY MODE. Switch to HOLD, stop the change at the current light status.
USB/SD
BT
Phono
AUX
Light effects
13
Publicité
