ION Party Starter Guide D'utilisation page 5

Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Party Starter and it will automatically go into pairing mode to search
for Bluetooth devices.
3. If your Bluetooth device is not able to pair to Party Starter, press the 'reset'
button on Party Starter to break the previous Bluetooth connection and reset
the Bluetooth module.
4. Navigate to your Bluetooth device's setup screen, find "ION Speaker" and
connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
5. The Paired LED will light up solid when it is 'paired'.
Note: If you experience trouble pairing or playing music, update your device's
OS.
6. To disconnect a paired Bluetooth device, press the 'reset' button on Party
Starter.
7. To connect to another Bluetooth device, repeat steps 3-4.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source.
Also, try to reduce the overall volume of Party Starter.
If there is too much bass: Try adjusting the tone or EQ control on your sound
source to lower the bass level. This will allow you to play the music louder before
clipping (distortion) occurs.
5