Display Symbols Receiver; Display Symbols Transmitter - Comfort audio Comfort Contego T800 Mode D'emploi

Display Symbols Receiver, Comfort Contego R800
Contego
CH:2
9 9
Signal strength between receiver and transmitter.
Battery status.
Key lock is activated, see page 13..
CH:2
The number shows which channel the receiver is set on.
Transmitter volume is showed in the bar display.
9
Receiver volume is showed in the bar display.
9
Directional microphone setting to cover a limited area.
Omni-directional microphone setting to cover a larger
area.
8
Transmission
Shows contact between the
receiver and the transmitter.
If the receiver and transmit-
ter are too near one another,
"Too close" is displayed.
R800
Display Symbols Transmitter, Contego T800
CH:2
Battery status.
Key lock is activated, see page 13.
CH:2 The number shows which channel the receiver is set on.
Directional microphone setting to cover a limited area.
Omni-directional microphone setting to cover a larger area.
Line in / Microphone for listening to an external sound
source. When connected, an arrow is shown.
Shows the amplification of the external sound source.
9
Contego
9
T800
9