Functional Overview Of The Operating Elements - MAXXMEE KLP-B025 Mode D'emploi

Mobile cooling device
■
Do not use the remote control if a
battery has leaked. Remove dead bat-
teries from the battery compartment
immediately.
■
Always replace all batteries together.
Do not use batteries of different types
or brands, or batteries with different
capacities.
FUNCTIONAL OVERVIEW
OF THE OPERATING
ELEMENTS
The control lamps above the respective
control fi elds indicate which functions
have been activated.
Control Panel
ION (18)
Activate / deactivate air cleaning
If this function is active, negatively
charged ions which bind dirt particles
from the air are released.
TIMER (19)
Activate / set / deactivate timer
The device has a 24-hour timer. You can
adjust this by repeatedly touching the
TIMER fi eld (1 to 24 – Off). When the
timer is active, the setting appears
alternately with the speed level on the
display (21).
INTERVAL (20)
Activate / deactivate interval mode
When this function is active, the device
switches to an interval mode. This is
where the device operates on each speed
level for 20 seconds and then switches it
automatically. The mode starts with the
speed level which is set at the time of
activation and then circulates downwards
through all levels.
Example: P1 > P3 > P2 > P1 > P3 > ...
03088_Inlay_DE-EN-FR-NL_A5_V2.indb 15 03088_Inlay_DE-EN-FR-NL_A5_V2.indb 15
SPEED (22)
Set the speed level
The fan of the device has 3 speed levels.
You can set them by repeatedly touching
the SPEED fi eld. The setting appears on
the display (P1 – P2 – P3).
SWING (23)
Activate / deactivate rotation
When this function is active, the vertical
slats of the ventilation grille (3) automati-
cally swing from one side to the other.
COOL (24)
Activate / deactivate cooling and humid-
ifi cation
Please Note! This function can only be
used with a fi lled water tank (10).
When this function is active, the water
is pumped from the water tank into the
water tray (17) and from there it runs
out over the honeycomb fi lters (4) back
into the water tank. In the process, the
honeycomb fi lters are moistened and
thus cool the air fl ow. In addition, the air
is humidifi ed.
Once the water in the water tank has
been used up, you will hear beeps
and the COOL control lamp fl ashes.
The pump switches off automatically.
POWER (25)
Switch the device on / off
EN
15
04.09.2020 14:34:26 04.09.2020 14:34:26