Niko 10-200-04 Mode D'emploi page 11

10-200-04 / 10-300-04
Remarks installation
- Make sure the side of the flush mounting box is parallel to the wall. This way, the profile
of the external unit will better fit the surface.
- Do not tighten the screws too hard. This could distort the cover, making it more difficult
to remove or reinsert the nameplate.
- Do not seal the appliance with silicone or any other sealer. Any condensation water must
be able to drain out.
4. TECHNICAL DATA
- Dimensions flush mounting boxes:
10-200-04: ................... H159 x W126 x D40mm
10-300-04: ................... H203 x W126 x D40mm
- Dimensions external units:
10-201 to 10-204: ......... H208 x W150 x D3mm
10-301 to 10-304: ......... H252 x W150 x D3mm
5. GUARANTEE PROVISIONS
- Period of guarantee: 2 years from date of delivery. The delivery date is the invoice date
of purchase of the product by the consumer. If there is no invoice, the date of production
applies.
- The consumer is obliged to inform Niko in writing about the defect, within two months
after stating the defect.
- In case of a failure to conform, the consumer has the right to a repair or replacement
(decided by Niko) free of charge.
- Niko cannot be held liable for a defect or damage as a result of an incorrect installation,
improper or careless use or wrong usage or transformation of the goods.
- The compulsory regulations of the national legislation concerning the sales of consumer
goods and the protection of the consumers in the countries where Niko sells, directly or
via sister or daughter companies, chain stores, distributors, agents or permanent sales
representatives, take priority over the rules and regulations mentioned above.
EN 11