Niko 10-200-04 Mode D'emploi page 10

10-200-04 / 10-300-04
Tip: Use the same colour code for identical terminals (a, b, P...) for all the products in
one system!
Installation
Enter the connection cable through the opening provided (A) in the flush mounting box.
Place the flush mounting box in the desired position on the wall at a height depending on
the application (table 1) by means of screws (B). Make sure that the correct side of the
flush mounting box points upwards (fig.1), so that the two mounting holes in the external
unit are located right across the screw connections in the flush mounting box.
standing up straight (=at eye level)
children, wheelchair users
sitting in a car
sitting in a truck
fig.1: flush mounting box 10-200-04 with indication of top side
10
table 1: recommended mounting height
B
A
B
recommended mounting height
±150cm (only audio)
±160cm (with video)
±120cm
±100 - 120cm
±180 - 220cm
B
B
EN