Publicité
Liens rapides
PARTS & OPERATING MANUAL
This operator's book has important information for the use and safe operation of this machine. Read
this book carefully before starting the machine. Keep this book and tell all operators to read the book. If
you do not follow the instructions, you can cause an injury or damage equipment, furniture or buildings.
For new books, please download your copy from our website www.pacificfloorcare.com or write to:
Pacific Floorcare
2259 S. Sheridan Drive
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no concealed freight damage. If such damage is
discovered, file a "CONCEALED DAMAGE REPORT" immediately with the delivering carrier.
The contents of this manual are based on the latest product information available at the time of
publication. Pacific reserves the right to make changes or improvements without notice.
Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better
serve you over the lifetime of the product. For quick and easy registration, go to:
B-1500
BURNISHER
Model: 545401
PLEASE READ THIS BOOK
www.pacificfloorcare.com/Register Product.
Publicité
Manuels Connexes pour Pacific Floorcare B-1500
Sommaire des Matières pour Pacific Floorcare B-1500
- Page 1 Pacific reserves the right to make changes or improvements without notice. Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better serve you over the lifetime of the product. For quick and easy registration, go to:...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS To ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not un- derstand, ask your supervisor. WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY.
- Page 3 Grounding Instructions This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
- Page 4 OPERATING PROCEDURES WARNING! For the safe operation of this machine follow the instructions given in this manual and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT! This machine is intended for commercial use.
- Page 5 OPERATING PROCEDURES OPERATION Plug the machine’s power cable into a properly grounded outlet (see Safety Instructions). Next, adjust the handle height to a comfortable position by pulling up on the handle adjustment lever as shown below. The machine will not start when the handle is in the upright position.
- Page 6 OPERATING PROCEDURES MAINTENANCE AFTER EACH USE: Store the machine in a clean dry area. Wipe the entire machine and cord down with a clean cloth. Remove the pad and clean thoroughly. Wrap the machine’s electrical cord onto the handles and the cord hook provided. CHECK the cord and plug for nicks, cuts or damage.
- Page 7 / brosses adaptées à votre demande, s’il vous plaît contacter votre représentant des ventes ou, si cela est inconnue, contactez votre superviseur. Pad / Type de brosse Habitué Brunissage Supprime les marques noires et restaure le brillant à la fin-de-chaussée B-1500 BURNISHER - WIRING DIAGRAM...
- Page 8 SUGGESTED SERVICE PART LISTING DESCRIPTION PART NUMBER Bearing, sealed, press-in 902055 Belt 903047 Block, clamp, handle 531303 Breaker, circuit, 18 amp 501350 Brush kit, motor, carbon, 4-piece set 530902 Bumper, 20-inch 481203 Cord, electrical, 50-feet 908129 Cover, motor 502396 Driver, pad, 19-inch, flex 485904 Grip, handle 533701...
- Page 12 WARRANTY POLICY BURNISHER, B-1500 The Pacific Floorcare B-1500 burnisher has been manufactured, tested and inspected in accordance with specific engineering requirements and is WARRANTED to be free from defects in workmanship and materials as follows: Ten (10) years parts, One (1) year labor - Rotational molded base Three (3) years parts, One (1) year labor - All other components unless excluded below.