1. Manuels
  2. Marques
  3. Pacific Floorcare Manuels
  4. Machines à plancher
  5. FM-17DS
  6. Manuel d'opération

Pacific Floorcare FM-17DS Manuel D'opération

Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
FM-17DS / FM-20DS
DUAL SPEED FLOOR MACHINE
Model: 535421 & 535431
PARTS & OPERATING MANUAL
Thank you for purchasing a Pacific Floorcare product. Carefully inspect all components for freight damage. If such
damage is discovered, file a "CONCEALED DAMAGE REPORT" immediately with the delivering carrier.
Read this manual carefully and keep it near the machine, protected from liquids and other damaging substances. Failure to
follow the instructions may result in injury or damage to equipment and property.
The contents of this manual are based on the latest product information available at the time of publication. Pacific
Floorcare reserves the right to make changes or improvements without being obliged to apply changes to the machines
previously sold.
New manuals can be downloaded from: www.pacificfloorcare.com/manuals

Publicité

Table des Matières
loading

Manuels Connexes pour Pacific Floorcare FM-17DS

Sommaire des Matières pour Pacific Floorcare FM-17DS

  • Page 1 Model: 535421 & 535431 PARTS & OPERATING MANUAL Thank you for purchasing a Pacific Floorcare product. Carefully inspect all components for freight damage. If such damage is discovered, file a “CONCEALED DAMAGE REPORT” immediately with the delivering carrier. Read this manual carefully and keep it near the machine, protected from liquids and other damaging substances. Failure to follow the instructions may result in injury or damage to equipment and property.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS To ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not un- derstand, ask your supervisor. WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY.

  • Page 3: Grounding Instructions

    Grounding Instructions This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

  • Page 4: Operating Procedures

    OPERATING PROCEDURES WARNING! For the safe operation of this machine follow the instructions given in this manual and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT! This machine is intended for commercial use.
  • Page 5 OPERATING PROCEDURES OPERATION Plug the machine’s power cable into a properly grounded outlet (see Safety Instructions). Next, adjust the handle height to a comfortable position by pulling up on the handle adjustment lever as shown below. The machine will not start when the handle is in the upright position.

  • Page 6: After Each Use

    OPERATING PROCEDURES MAINTENANCE AFTER EACH USE: Store the machine in a clean dry area. Wipe the entire machine and cord down with a clean cloth. Remove the pad or brush and clean thoroughly. Wrap the machine’s electrical cord onto the handles and the cord hook provided. CHECK the cord and plug for nicks, cuts or damage.

  • Page 7: Détails De La Demande Pour Pad / Brosse Utilisation

    APPLICATION DETAILS FOR PAD/BRUSH USE For best cleaning results, use the appropriate pad/brush for your cleaning application. If you need help sourcing the ap- propriate pads/brushes for your application, please contact your sales representative or if this is unknown, contact your supervisor.

  • Page 8: Wiring Diagram

    SUGGESTED SERVICE PART LISTING DESCRIPTION PART NUMBER 17-INCH QTY 20-INCH QTY Block, clamp, handle 531303 Brush kit, motor, carbon, 4-piece 530902 Bumper, 17-inch 481202 Bumper, 20-inch 481203 Cord, electrical, 50-feet 908129 Cover, motor 502397 Driver, pad, high speed, 17-inch 505908 Driver, pad, high speed, 20-inch 505909 Grip, handle...
  • Page 9 FM-17DS FLOOR MACHINE - BASE ASSEMBLY ITEM QTY PART NUMBER DESCRIPTION 531304 BASE, 17INCH, ROTOMOLD 481202 BUMPER GREY PX17.ipt 535202 MOTOR & GEARBOX DUAL SPEED 1.5HP 962474 SCREW .31-18X1.5 SHC ZINC GR8 980109 WASHER FLAT .31 X 1.0 ZINC 980094 WASHER, SPLIT LOCK, .31, SS...
  • Page 10 FM-20DS FLOOR MACHINE - BASE ASSEMBLY ITEM QTY PART NUMBER DESCRIPTION 531305 BASE 20INCH ROTOMOLD 481203 BUMPER GREY PX20 535202 MOTOR & GEARBOX DUAL SPEED 1.5HP 962474 SCREW .31-18X1.5 SHC ZINC GR8 980109 WASHER FLAT .31 X 1.0 ZINC 980094 WASHER, SPLIT LOCK, .31, SS 920012 NUT, NYLOCK, 5/16-18, ZINC...
  • Page 11 FM-17DS & FM-20DS FLOOR MACHINES - HANDLE ASSEMBLY REPLACEMENT HANDLE ASSEMBLY: 535009 ITEM QTY PART NUMBER DESCRIPTION 533901 HANDLE, WELDMENT, LONG 531303 BLOCK, CLAMP, HANDLE 962389 SCREW PAN .25-20 X 1.5 920011 NUT, NYLOCK, 1/4-20, ZINC 537001 PLUNGER, HANDLE 538301...
  • Page 12 FM-17DS & FM-20DS FLOOR MACHINES - MOTOR & GEAR BOX ASSEMBLY ITEM QTY PART NUMBER DESCRIPTION 911705 HARNESS WIRE 535202 505181 LIGHT-BRUSH INDICATOR 532303 END BELL UPPER 535202 539204 SPEED CONTROL 535202 911706 RECTIFIER 535202 & 545202 530901 BRUSH RING CARBON ASSY 535202...
  • Page 13 FM-17DS & FM-20DS FLOOR MACHINES - SOLUTION TANK ASSEMBLY (OPTIONAL) ITEM QTY PART NUMBER DESCRIPTION 548601 TANK ASSY FM 533301 FITTING STR .25 FPT .25 BARB BRASS 544105 TUBING 1/4” - 11” 533302 FITTING ELBOW .25NPT .25 BARB NYL T4056...
  • Page 16 www.pacificfloorcare.com...

Ce manuel est également adapté pour:

Fm-20ds535421535431

Table des Matières