Publicité
Liens rapides
PARTS & OPERATING MANUAL
B-1500 & B-2000 BURNISHERS
1500 & 2000 RPM WITH
CAST ALUMINUM BASES
This operator's book has important information for the use and safe operation of this machine. Read this
book carefully before starting the machine. Keep this book and tell all operators to read the book. If you
do not follow the instructions, you can cause an injury or damage equipment, furniture or buildings.
For new books, please download your copy from our website www.pacificfloorcare.com or write to:
Pacific Floorcare
2259 S. Sheridan Drive
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no concealed freight damage. If such damage is
discovered, file a "CONCEALED DAMAGE REPORT" immediately with the delivering carrier.
The contents of this manual are based on the latest product information available at the time of
publication. Pacific reserves the right to make changes or improvements without notice.
Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better
serve you over the lifetime of the product. For quick and easy registration, go to:
PLEASE READ THIS BOOK
www.pacificfloorcare.com/Register Product.
Publicité
Manuels Connexes pour Pacific Floorcare PURPOSE BUILT B-1500
Sommaire des Matières pour Pacific Floorcare PURPOSE BUILT B-1500
- Page 1 Pacific reserves the right to make changes or improvements without notice. Thank you for purchasing a Pacific Floorcare product. Warranty registration will allow us to better serve you over the lifetime of the product. For quick and easy registration, go to:...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS To ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do not understand, ask your supervisor. READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING: To reduce the risk of fire, electric shock, or injury: 1.
- Page 3 Grounding Instructions This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
- Page 4 OPERATING PROCEDURES WARNING! For the safe operation of this machine follow the instructions given in this booklet and the training given by your supervisor. Failure to do so can result in personal injury and/or damage to machine and property! DO NOT OPERATE MACHINE IN AN EXPLOSIVE ENVIRONMENT! The models shown in this manual are intended for commercial use.
- Page 5 OPERATING PROCEDURES OPERATION Set the machine upright onto the pad. Plug the machine’s power cable into a properly grounded outlet (see Safety Instruc- tions). Next, release the handle by unlocking the knob and allow the handle to lower into a comfortable position. THEN ALWAYS SECURE THE HANDLE LOCKING KNOB.
- Page 6 B-1500 & B-2000 BURNISHERS, CAST ALUMINUM BASE 2000 RPM Only...
- Page 7 ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 505720 Handle Nipple 962026 Screw, 8-32 x 1/2 Switch Box (for svc order 503920) 506340 Label, Brush Indicator 501210 Bumper, Handle 505286 Motor, 1.5 HP-115V 962003 Screw, 10-32 x 3/4 Pan Hd. 505278 Motor, 1.5 HP-220V 920001...
- Page 8 MOTOR PARTS LIST ITEM PART NO. DESCRIPTION QTY. 505286 Motor 115V, 1.5HP 505278 Motor 220V, 1.5HP 50C 502919 End Bell - Motor LOWER 500417 Armature Asm.w/Bearings,115V 500424 Armature Asm.w/Bearings, 220V 902012 Bearing, Motor Lower Field & Shell Assembly 902003 Bearing, Motor Top 500903 Carbon Brush, Motor 115V 510901...
- Page 9 WIRING DIAGRAM...
- Page 10 BURNISHER, MODEL B-1500 & B-2000, CAST ALUMINUM BASE The Pacific Floorcare B-1500 & B-2000 Burnishers have been manufactured, tested and inspected in accordance with specific engineering requirements and are WARRANTED to be free from defects in workmanship and materials as follows: Three (3) years parts, One (1) year labor - Castings &...