Philips HP4696 Mode D'emploi page 8

ENGLISH
8
Using the appliance
With the Salon Geometricks 8-in-1 you can create tight curls, large
curls, waves, ringlets, crimps and a sleek look.
1 After having connected the attachment to the handle, place the
appliance on the stand of the attachment and put the mains plug
in the wall socket. The pilot light goes on and the appliance starts
heating up (fig. 3).
2 Start styling when the ready dot on the attachment changes
colour (fig. 4).
3 When using one of the curling attachments or the brush
attachment, always make sure the end of the lock is wound in the
required direction.
4 How long you have to keep the styler in your hair depends on
the thickness of your hair. If you have fine hair, 5 seconds will be
long enough for a good result. Leave the styler in your hair
longer (max. 10 seconds) if your hair is thicker.
Large or tight curls
1 Connect the large or small curling attachment to the handle.
Make sure that the stand is pointing downwards.
2 Take a lock of hair, open the clip by pressing the lever and place
the lock between the barrel and the clip (fig. 5).
3 Release the lever and slide the barrel to the end of the lock.
Then wind the lock round the barrel.
Make sure that the end of the lock is wound in the required direction.
4 Open the clip after 5 to 10 seconds and remove the barrel from
the hair. Let the curls cool down before combing, brushing or
finger-combing the hair into its final style.
You can comb the curls with your fingers to add volume.