Programming - Elnur Gabarron PG4Z Mode D'emploi

Programming

When starting up, the "Comfort mode from 6am to
11pm" program is applied to all the days of the wee and
all the zones.
Turn the knob to PROG to change the programming.
The 1st time slot of zone 1 flashes.
Time of
the slot
consulted
1st
time slot
Economy
for 1 hour
Comfort
for 1 hour
1. Select the zone to program
Press the button.
2. Create your program
Programming starts on day 1 at midnight.
Press buttons or to set your different Comfort or
Economy periods (depending on the settings made at
the CF02 menu).
Day
Program
profile
Selection
of the zone
Confirm
and go to
the next day
- 42 -
3. Confirm the program
Press the OK button to confirm and continue on to the
next day to program it separately. Turn the knob to exit
the programming mode.
4. Confirm and copy the program
On the same zone
for the next day
Press and hold the OK
button for 3 seconds.
Example:
Day 1 Day 2
Z1 Z2 Z1 Z2
OK
Z3 Z4 Z3 Z4
3
sec.
Press the OK button to confirm.
OR
On the next zone
OR
for the same day
Press and hold the
button for 3 seconds.
Example:
Day 1 Day 1
Z1 Z2 Z1 Z2
Z3 Z4 Z3 Z4
3
sec.
- 43 -