Starting Up - Elnur Gabarron PG4Z Mode D'emploi

Starting up

Turn the knob to and press
the right-hand button for
5 seconds until P460 is displayed
(maintenance menu reserved for
the installer).
Press OK.
The screen displays CF01.
CF01 - Select the number of zones
Setting 1 to 6 zones
(4, by default).
Press + or -- to make your choice,
OK to confirm it and go to
the next menu.
5 sec.
- 34 -
CF02 - AUTO mode
operating options
Choose between 3 modes.
Press + to make your choice, OK
to confirm it and go to the next
menu.
Operating mode
selection
CF03 - Associating a programmer with
a transmitter
You can associate the
programmer with a "PLC
transmitter" type device
(GECPL1, GP6 CPL,
TYPHONE 2 CPL, etc.).
Otherwise, press OK to move
on to associating the receivers.
The unit displays "----" .
Comfort / Economy (default)
Mode
Comfort / Frost protection
Mode
Comfort / Shut down
Mode
- 35 -