Publicité
Les langues disponibles
Les langues disponibles
Dear Customer,
Thank you for choosing Husqvarna as your supplier.
We hope that the model C 3000 pre-separator will be to your satisfaction and meet your expectations.
Please feel free to browse information about our product programme on our web site
These instructions are only for pre-separators C 3000.
Pre-separators C 3000 can only be used with dry, non-explosive materials.
Husqvarna will not be held responsible if the pre-separator is used for other applications
or been used in ways other than those outlined in this instruction manual.
Before using the pre-separator, please safety regulations carefully.
Read the complete instruction manual before using the pre-separator.
All spare parts used for pre-separator types C 3000 must be those specified by
Husqvarna Construction Products.
General safety precautions
•
Please read the operator's manual carefully and make sure you understand the instructions before
using the machine. Save all warnings and instructions for future reference.
•
Keep in mind that it is you, the operator that is responsible for not exposing people or their property
to accidents or hazards.
•
The machine must be kept clean. Signs and stickers must be fully legible.
•
Secure the machine during transport.
•
Ensure the machine is cleaned and that a complete service is carried out before long-term storage.
Unpacking
When unpacking, check that the pre-separator is undamaged and that there are no visible marks on the head,
hoses or accessories.
Introduction
Notice!
www.husqvarnacp.com
Publicité
