Publicité
Les langues disponibles
Les langues disponibles
SPEAKER CONNECTION
On the right side of the mixer you will find two 6.3mm jacks, these are your speaker output jacks. Connect the supplied speaker
cables from these jacks to the jacks on the backside of the speakers.
CONTROLS AND CONNECTIONS
1.
Peak indicator
This indicator will light up when signal of the respective channel are on maximum. When
the LED light up continually you need to adjust the volume down, otherwise permanent
damage to equipment might occur!
2.
Microphone / Line inputs
Combo inputs (XLR / 6.3mm ¼" jack) for connecting a microphone or an audio unit with
mono line output (e.g. music instrument).
3.
Input selector switch
Selects the input signal:
• Button not pressed: signal of the line input
• Button pressed: signal of microphone
4.
Treble
Adjust tone control for treble respective channel.
5.
Bass
Adjust tone control for bass respective channel.
6.
Effect
Adjust the signal level of echo respective microphone input.
7.
Volume
Adjust the signal level of the respective channel.
4
Publicité
