Combustion Air Slide Valve; Regulation Of Combustion Air; Fire Grate; Inspection Door - Olsberg 23/695 Instructions

Combustion air slide valve

Operating lever for combustion air supply
CLOSED
● Operating lever on CLOSED:
all slide valves closed
● Operating lever on 1/2 OPEN:
Secondary air slide valve completely open /
Primary air slide valve completely closed
● Operating lever on OPEN:
Secondary air slide valve completely open /
Primary air slide valve completely open

Regulation of combustion air

Position of operating lever:
OPEN ......... Ignition position, max. heat output
1/2 OPEN ... Nominal heat output with billet wood
1/2 OPEN ... Nominal heat output with wood briquettes
3/4 OPEN ... Nominal heat output with lignite briquettes
CLOSED ..... Obtain glow
● As the secondary air also contributes to the cleanli-
ness of the glass pane, the operating lever should be
set on "1/2 OPEN" minimum. This also applies in the
event of low-load operation.
● When not operating the lever should be set on
"CLOSED", to reduce the cooling down of the room.
OPEN

Fire grate

Operating lever for the fire grate
● With the help of the operating lever the fire grate can
be opened or closed to move the ash from the com-
bustion chamber to the ash pan by pushing the fire
grate back and forth.
● Primary air can only enter the combustion chamber
if the fire grate is set on open position (operating le-
ver pulled out).

Inspection door

The inspection door below the combustion chamber
is fitted with a magnetic pressure closure. The inspec-
tion door can be opened by lightly pressing on the but-
ton (Olsberg logo). Likewise the door can be closed by
lightly pressing.
press here
17