Compact Air Purifi er
USE
Please Note!
■
■
■
1. Connect the device to a socket in the wall.
2. Press the On / Off switch in order to switch on the device.
3. If the device is no longer going to be used, switch off the
CLEANING AND STORAGE
Please Note!
■
■
09813_Inlay_DE-EN-FR-NL_A6_V2.indb 19
09813_Inlay_DE-EN-FR-NL_A6_V2.indb 19
Only connect the device to a socket that is properly in-
stalled and matches the technical data of the device. The
socket must also be readily accessible after connection so
that the connection to the mains can quickly be isolated.
The device without an extension cable should only be
used in wall sockets in a vertical position, and not horizon-
tally (lying).
Do not operate the device unsupervised so that you can
intervene immediately if there are any faults.
For effi cient operation we recommend closing the
windows and doors of the room.
The UV light switches on and the device starts to operate.
device using the On / Off switch and pull the mains plug
out of the socket.
The combination fi lter cannot and must not be cleaned.
Do not use any sharp or abrasive cleaning agents or
cleaning pads to clean the device. These may damage the
surfaces.
EN
19
24.08.2020 16:01:24
24.08.2020 16:01:24