Cleaning Modes - Proscenic COCO Smart 790T Mode D'emploi

Note:
The numbers show on remote is delay time during scheduling.
For example: If current time is 8:00am, and remote setting number is 01:00. If it has
been successfully saved, the robot will start working in1 hour. It means 9:00am has
been scheduled as working time and the robot will start cleaning at 9:00am everyday.
B. Cancel the scheduling
Press"Schedule"on remote to enter scheduling mode , then press
"ON/OFF" button one more time.(Display screen on main body will
show 00:00 when the scheduling has been cancelled. If not, press
"ON/OFF" one more time.
Note:
a. During time scheduling, press "ON/OFF" on remote to set hour and minute;
press "Schedule" to enter/quit schedule setting.
b. The "ON/OFF" on remote has the same function as "

Cleaning Modes

Four cleaning modes to meet your different needs.
1. Auto cleaning
Press "Clean" on robot or "Clean" on
remote control to start auto cleaning. Robot
enters auto cleaning mode.
2. Area cleaning
Press "AREA " on remote to enter area
cleaning.
a. Choose area cleaning "AREA 1", the
screen on remote will show "AREA 1"
and the robot will clean about 1*1m
square area line by line.
Product Operation
10
"on main body.