Install Airfoils
1
Remove and recycle the plastic protective cover.
Moving clockwise, align each airfoil on the fan hub and secure
it with the airfoil hardware (Fig. 1). Make sure the sticker color
on each airfoil matches the corresponding sticker color on
the fan hub!
Fig. 1
HAIKU® BY BIG ASS FANS
M5 Screw
Grommet
Airfoil
Install Lower Cover
2
If you purchased the fan light kit, proceed to the
instructions included with the kit, and then return to
these instructions.
Attach the lower cover as shown (Fig. 2).
Fig. 2
Lower Cover
7