BIG ASS FANS FR127A-S0 Mode D'emploi page 19

Install Mounting Plate and Single Bracket
1
Slide the rubber bumpers onto the extension tube brackets (Fig. 1.1).
Secure the mounting bracket to the mounting structure with suitable hardware (Fig. 1.2). Your mounting structure may differ from the
illustration.
Loosely attach one mounting bracket to the mounting plate with two 6 mm nylock nuts, but do not fully tighten (Fig. 1.3).
Fig. 1.1
Extension Tube Brackets
Rubber
Bumper
HAIKU® BY BIG ASS FANS
Fig. 1.2
Mounting
Plate
Suitable Mounting
Hardware
Outlet box shown. Your mounting
structure may differ from the illustration.
Fig. 1.3
Mounting Plate
6 mm Nylock Nut
17