Remove From Pool; Remove Debris - Aqua Products SSDP37 Serie Manuel De L'utilisateur

Adjustable
Pin
Fixed
Pin
Figure 9. Alternate Wheel Axle Pins

Remove from Pool

1. Gently pull the floating cable to bring
the cleaner within arm's reach
(Figure 10).
Figure 10. Bring Cleaner to Pool's Edge
2. Gently pull the cleaner up to the
waterline (Figure 11).
Figure 11. Pull Cleaner to Waterline
3. Use the handle to lift the cleaner
from the water (Figure 12). Never lift
the cleaner out of the pool by the
floating cable.
Axle Position
Figure 12. Lift Cleaner Using the Handle

Remove Debris

For best performance, remove debris after
every cleaning cycle.
WARNING
To avoid electric shock and other hazards
which could result in permanent injury or
death, disconnect (unplug) the cleaner
from the power source before performing
any cleaning and maintenance.
1. Unplug power to the cleaner at the
control unit. Unplug the control unit
from the power source.
2. Push side tabs down and outward to
release the cleaner lid (Figure 13).
Figure 13. Remove the Cover
3. Pull gently on the elastic band around
the suction ports to release the filter
bag (Figure 14).
9